Meyer Plow A Frame and Sector Problem
This is pretty common. This plow came to my shop (www.SmithBrothersServices.com) in two pieces. The guy asked if I can fix it, I said sure.
The problem is that the King Bolt (read center pivot bolt) gets worn, and then loose, and this is the aftermath. It can easily be avoided by making sure it is not worn, and loose. This is a problem that affects all plows, not just Meyer plows. Just making sure it is tight and not worn can prevent this.
What finally did this plow in was a lot of backdragging driveways, with the King Bolt loose.
We welded it up, good as new.
We also filled in the wear in the hole in the Sector. It too was starting to egg out.
More info on Meyer Plows:
|Changing Hydraulic Fluid||Plow Pins|
|Meyer® E-47 Wiring Diagram||Plow Tech|
|Meyer Plow Pivot Pin Repair||Adding a 3rd Trip Spring|
|Meyer Plow Pumps||Coil And Valve|
|Meyer E-47 Pump Pics||Meyer A Frame & Sector|
All the writings, all information, charts, diagrams, and photos on this entire
web site, are Copyright
©1998 - 2009 Charles D. Smith / Smith Brothers Services, LLC. All rights reserved. May not be reproduced in whole or in part in any format, without express written permission from the author to do so.
Our Other Sites:
Snowplowing-Contractors.com ChucksChevyTruckPages.com SmithBrothersPlowParts.com
LetsTalkSnow.com MeyerPlows.info PlowPump.info DiamondPChopper.com